crafting

Portal 2 Cosplay: Finished with the first pieces!

It’s been, like, four weeks since I last posted, and you may think I’ve kind of forgotten about this. Not so! I’ve been working on it so much I actually threw off NaNoWriMo (which I ALWAYS do) to work on it.
And I’m glad to say that the first pieces are finished, painted, and glued in place!
Here’s pretty much how it went: Bondo, sand, Bondo, sand, fill, sand, glue, sand, prime, sand, prime, sand, prime, sand, paint. My hands were so raw from all that sanding that the fingerprint reader on my phone stopped accepting my fingerprint, and my hands are still stained Bondo grey.
Nothing of interest happened during the sanding phase, so here’s a picture of what my porch looked like shortly after I finished shaping the pieces.

I'm still getting the filler dust out from under my nails.

I’m still getting the filler dust out from under my nails.


Once I sanded them, my helpful dad and I primed them. They were so smooth, it brought figurative fangirl tears to my eyes.
Like a baby dolphin.

Like a baby dolphin.


I spray-painted them white, cut the boot to the way I needed it, and marine-sealant’ed that sucker on, with some assistance from my helpful cosplay dad.
And they smell like a car shop.

And they smell like a car shop.


The bad news is I can no longer actually get them on in a reasonable amount of time, since they aren’t as flexible as they were before they were covered in auto body filler. The good news is, I can fix that with a zipper on the heel, and OMG I ACTUALLY JUST FINISHED A WHOLE FLIPPIN’ PIECE.
Are they perfect? No. Who cares? This is my first cosplay, and, considering I didn’t just say “screw it” and painted a pair of leather boots, I’m doing pretty well.
My next step is to do the same thing to the bands that go around the ankles. It won’t take me nearly as long, since they’re much smaller. After that, I’m going to get to work on the heels, attach them to the back pieces, Bondo those as well, and then attach everything together. (That makes it sound so simple. Sanding is not fun.)

Anywaaaaay, thanks for checking me out!

Portal 2 Cosplay: All finished with Worbla!

I’m so sorry I haven’t posted in so long. With everything that’s been going on, I haven’t had much time to work on my cosplay.
Anyway, I’m all finished with the Worbla part of the boots. My next step will be to shape them a little before I cover them in Bondo and sand them down to get them all nice and smooth.
Remember how I said this time I’d have more pictures? I don’t. Instead, I have a video, detailing how I make my foam-and-Worbla sandwiches and how I made that difficult-to-explain toe piece.
You also get to see my arms, my shirt, and my hair, so that’s fun.
(Sorry for the low video quality! I swear, it was great on my camera. Darn SD.)

Anywaaaay, there’s that. Once I got all the pieces formed and assembled, this is what I came out with:

As you can see, none of the pieces are actually attached yet (not to the boot or to each other), which is why they look so awkward.

As you can see, none of the pieces are actually attached yet (not to the boot or to each other), which is why they look so awkward.

Note: the piece on the ankle isn’t actually nearly that big. The little strap in front had just slipped down, so it looks enormous.

All I have to do now is Bondo them, paint them, and then do the heel (yuck).
Anyway, that’s what I’ve done. Stick around for more updates on this project! (I promise they’ll be more comprehensive after this. Basically the whole point of this post was that video.)

Portal 2 cosplay: Making the boots’ first Worbla pieces

Hey, cosplayers, gamers, and fiction enthusiasts, and welcome to Teen Fiction Girl! In this post I’ll be making pieces based on the patterns I created in my last two cosplay posts. I’m going to stop linking every previous post, because as this post goes on the list is going to get really long, so I recommend you (if you haven’t already) click on the “Portal 2 Cosplay: Chell” category on the menu up there. ^^
Also, an advance warning: since most of the cosplay process detailed in this post involved me using heat guns and struggling to form plastic and foam before it cooled, there are very few pictures of the process. I’ll do my best to describe it to you, or provide an alternate tutorial/demonstration where I can.
Before I get started on the process, I think I’d better cover the materials I’m using.
Everyone knows what craft foam is, but the key component of these pieces is a material called Worbla. Worbla is a thermoplastic, which means it has a low melting temperature and can be easily heated up and molded. It’s about a millimeter thick, flexible, and a key component in many professional cosplayers’ wardrobes.

The first thing I did was slightly alter the pattern for the toe piece. It was large enough to fit the boot, but it didn’t wrap far enough around the back, and it was going to cause some weird gaps if I didn’t fix it. I made it a little larger by tracing it onto a piece of posterboard, drawing on the extra width, cutting it out, and taping it on.

I was worried that I might not have enough Worbla for the new, larger pieces, but they turned out great.

I was worried that I might not have enough Worbla for the new, larger pieces, but they turned out great.


At the time I made these components, I had a 15″x19″ piece of Worbla that I’d bought previously just to play with. I also had an enormous roll of craft foam, which is the first thing I used. I traced the patterns onto the foam (once for the ankle piece, twice for the toe piece – you’ll see why in a minute) and cut them out.
I laid each foam piece out onto the Worbla, about an inch apart. I measured 3/4″ all the way around them, traced my new, larger line, and cut it out. (That’s another awesome thing about Worbla: it cuts just fine with scissors.)
Next came the first somewhat dangerous part. Yay, danger!
I got ahold of my trusty heat gun (actually, it’s usually rather unreliable, and extremely hard to turn off – but you get what you get) and heated up the Worbla until it was floppy. I centered the foam on the melted plastic and wrapped the plastic around the edge. I now had three pieces – one ankle piece, two mirrored toe pieces – that looked as though they were made of thick Worbla, when, in reality, they were foam with little Worbla hats on top.
I'm really sorry for the weird stripey shadows; lace curtains and photography don't really mix.

I’m really sorry for the weird stripey shadows; lace curtains and photography don’t really mix.


My next step was to make the flat pieces into components of the boot. Remember how I was confusing everyone by talking about the piece that goes on the “bottom”? You’re about to see what I meant.
I grabbed the boot I was going to use and stuffed it with plastic bags again. I took one of the mirrored toe pieces and conformed it to the side of the boot. (Sorry I don’t have any pictures!) I took the other piece and did the same, but on the other side of the boot. Now I had two halves of the shell that was going to go over the foot part of the boot. It was sort of like those phone cases where the front piece snaps onto the back piece, if that makes any sense.
My next step was to join them. I heated up both pieces, sandwiched them back onto the boot, and connected them along the front of the foot, so now, instead of having two halves of a “boot case”, I had one “snap-on” one.
This was the final product. Don't worry about the weird bubbles on the side; I smoothed them out later (and made the Worbla fit more tightly as well).

This was the final product. Don’t worry about the weird bubbles on the side; I smoothed them out later (and made the Worbla fit more tightly as well).


If this step was a little hard to understand, I’m sorry. Kamui Cosplay has (to the best of my knowledge) never made a pair of long-fall boots, but Svetlana made a pair of bracers using almost the same technique, so, if you want, you can watch this video to better understand what I did.

Now that the toe piece was squared away, I got to work on the ankle piece.
Since I’d done this one a hundred times with the posterboard version, this one was super easy. All I had to do was wrap it around the foot of the boot and connect the parts that needed to be connected.
There were just a couple of hiccups: one, the part that attaches across the front of the foot was slightly too short. When I made my patterns, I hadn’t realized that it was going to be wrapping around the toe and ankle piece, which is a lot thicker than just the boot. It was really easy to make a little foam-and-Worbla square to connect them in the center.
The hardest part was keeping the ankle piece and the toe piece from sticking together. To keep both pieces removable (which was vital at this point, seeing as I hadn’t sanded or painted either piece yet), they needed to stay separate.
When the Worbla cooled, the result was this:

I'm not actually sure what that red thing on the floor is. I think it's a lid of some kind.

I’m not actually sure what that red thing on the floor is. I think it’s a lid of some kind.


As you can see, the piece wraps around the front and bottom of the boot, with two tabs sticking up (one on each side) for the back piece to attach to. And it goes over the toe piece, which is what I meant when I said that the toe piece would be the lowermost one.
I haven’t done the back piece for a multitude of reasons. I was originally going to use Sintra (a low-density PVC plastic; it smells nasty, but you can heat it with a heat gun as well), but it proved far too industrial for my uses: I couldn’t cut it without power tools, it was nearly impossible to mold, it wouldn’t stick to Worbla (which is kind of vital), and it lets off some pretty nasty fumes when you heat it. I could have used more foam and Worbla, but there were a few things wrong with this too. Firstly, I’d used all my Worbla on the other two pieces, and I didn’t want to buy more without knowing whether my idea was going to work or not. Secondly, I can’t forget about the brace on the back that’ll take the place of the heel: it’s going to have to be strong enough to hold up all of my 110 lb., and there’s no way I’m going to be able to attach something so heavy-duty to something so flexible.
My dad and I did some scheming, and this is the plan we came up with.
We’re going to make the braces out of aluminum bars. The back piece will also be aluminum, with a reinforced piece where the brace will attach; it’ll be riveted to the back part of the toe piece (thank goodness I made my pattern bigger!) and covered in Worbla so it can be easily painted and attached to the appropriate tabs on the ankle piece. Since aluminum is a lot harder to shape than foam (and since my pattern was slightly overlarge anyway, since I forgot to account for the thickness of the finished pieces), I cut a slit in the back of my back piece pattern.
I'll bend the pieces inward to close the gap in the back, and it'll make a nice curve.

I’ll bend the pieces inward to close the gap in the back, and it’ll make a nice curve.


My next order of business is to buy more Worbla and make identical pieces for the other boot. Next time, I swear I’ll take more pictures!!
Thanks for reading, and stay tuned for more updates on this project!

Portal 2 Cosplay: Making a long fall boot pattern

It’s late September, and you know what that means!
(If you guessed my birthday, well, you’re right, but that’s not quite what I was talking about.)
It’s time to start thinking about next year’s ComicCon cosplay!
Yeah, okay, maybe it’s not for another nine months, but for those of us who work slowly and want to pay attention to detail, it’s time to begin.
Over summer break, my gaming obsession was the Portal series. I’d heard some pretty epic things about it before, but I never got around to playing it until Steam’s fourth of July sale. I saw I could get both Portal games for five bucks, so I thought, why not? It’s only five bucks either way.
It was even more awesome than I expected.
Now, this isn’t a review, this is a cosplay DIY tutorial/walkthrough/demonstration, so let’s get started.
Here’s a picture of the character I’ll be cosplaying as:

Chell is the protagonist of the Portal series; I'll be cosplaying as the Portal 2 version of the character.

Chell is the protagonist of the Portal series; I’ll be cosplaying as the Portal 2 version of the character.

I decided to tackle the long fall boots first.
It took me a while to find a good pair of shoes to use for the structure of the boots. Target and Walmart yielded nothing; it was too early in the year to find cheap knee boots. I didn’t find adequate shoes at Payless, but I magically found a pair of gray leggings with a blue band at the top (who would’ve thunk they even made those?) and snatched them up in about two seconds.
I finally ended up going to Amazon. It took a while, but I finally found a pair of boots in the right size and color, with an accurately sized heel and platform, for only $7.

They're extraordinarily cheap and not exactly the prettiest, but they're perfect for the purpose.

They’re extraordinarily cheap and not exactly the prettiest, but they’re perfect for the purpose.

First I had to cut off the little buckles at the top. They didn’t serve any purpose except looking pretty, so it wasn’t a problem.
Some people make their sewing and crafting patterns by measuring and eyeballing the shape. Not me. Not only are my math skills questionable, but, since the boots’ design is slick and geometric, symmetry is a must.
Instead of wearing the boot to make it hold its shape, I stuffed it with Walmart bags.
standing

No plastic bags were harmed during the making of this cosplay. As of now, anyway.

No plastic bags were harmed during the making of this cosplay. As of now, anyway.

I then proceeded to cover it with tissue paper, and then with masking (or painter’s) tape. DON’T skip the tissue paper, because if you do, your pattern will be stuck to the boot, and something is going to get torn if you try to take it off.

My majestic mummy boot.

My majestic mummy boot.

Using the seams as a guide, I drew two Sharpie lines down the front and back of the boot.

That's my hand. Isn't it cute?

That’s my hand. Isn’t it cute?

And now comes the tricky part: drawing on the details. Using this reference image, I began to draw the lines that will be used to cut out each piece of the boot, carefully measuring each line to make sure they were equidistant from their respective sides of the shoe.
But seriously, curves are hard to do. The boot wasn’t symmetrical, and one side looked way better than the other.
So I decided to do the half-a-pattern technique. I’d make one half of the pattern, trace it, flip it over, and trace it again, to make a mirrored outline of the pattern. I’d cut it out, and it would be perfectly symmetrical without my having to measure a single thing.
And then came my second screw-up. Since now I was only drawing half a boot, I grossly underestimated the size of the plate on the back of the calf. And I cut the pattern off of the boot before I noticed.
I fixed this problem by taping up just the top half of the boot, cutting the messed-up part off of the finished pattern, and taping the usable portion of the latter back onto the boot. I ended up with a sort of franken-pattern.
Why am I telling you this instead of pretending it didn’t happen? So you know what NOT to do. No lasting harm was done to my cosplay (other than a wasted thirty minutes of pattern fixing), but yours will go a lot more smoothly if you don’t make the same mistakes I did.

The "finished" taped-up boot (before I fixed the undersized calf piece). Ignore the misplaced line on the bottom of the ankle piece; that was for measuring purposes only.

The “finished” taped-up boot (before I fixed the undersized calf piece). Ignore the misplaced line on the bottom of the ankle piece; that was for measuring purposes only.

Once my pattern was REALLY finished up, I cut off the unnecessary taped portions (the front of the top and the toe, where the original boot will show through or be cut away) and traced it onto a piece of posterboard, adding an extra half inch or so on the edges that will wrap around the boot (namely the front of the foot and the back of the calf). I traced the lines accordingly (all except the little slit on the side of the foot, which I’ll add on later), mirrored the cutout as described above, and made a two-sided pattern. I wrapped it around the boot for size, adjusted a little, and the pattern was done!

The final product!

The final product!

This is a master template for the patterns I’ll need to cut the material for the long-fall boot. Since I’ll be making the boot in three pieces (the back of the calf, the top piece of the ankle, and the bottom piece of the ankle and foot), I’ll need to use this pattern to create the others.
The next step is to create the smaller patterns and find out how much material I’ll need for each.
Stay tuned for more updates on my project!

The Demise of Screwy Thing

Hello, guys, and welcome to Teen Fiction Girl!  If you wanted a practical sort of post, I recommend you go find something else to read; this is kind of a continuation to an “article” I posted on Tween Fiction Girl a few months ago.

This is mostly aimed at a certain friend of mine.  You can call her Amber.

So, if you’ve followed me this far, you might just remember Screwy Thing.  At the time, friend Amber was rather into crafting for her dolls and such.  She tried as hard as she could to get me into the habit, which resulted in my ownership of several craft supplies that I used very uncommonly.  I got a bit bored one evening and decided to start messing around with them, and Screwy Thing was born.

screwything

Needless to say, Amber, who was actually a crafter, was horrified by the monstrosity I had produced.  I thought it was kind of cute, but she tried to do away with it several times.

Now, fast forward to last month, when my little sister, Autumn, was trying to make a book and she needed staples for the binding.  She accidentally stapled the wrong side of the book and she needed a staple puller to get it out.  As you can see above, a staple puller is one of the components of Screwy Thing, and she knew it.  So she took the staple puller out and the downfall of Screwy Thing began.  I tried to tuck it away safely in my closet and maybe repair it later, but I never got around to it.

So, just last night, I was cleaning out my closet for no reason other than that I wanted a clean closet, and I stumbled upon the sad remains of Screwy Thing.  The glue was crumbling, the sequins had been scratched, the staple puller had been used, the puffballs were entirely gone, and the whole thing was coated in a layer of dust.  It was terribly pitiful, like a starving puppy, sort of, except quite a bit less cute.

Well, I was in a cleaning frenzy, so there was nothing for it but to send Screwy Thing on to its final resting place:  the trash can.  I felt a little sad getting rid of such a wonderful artifact of crafting, but, I consoled myself, I took plenty of pictures.

I texted Amber about the catastrophe.  She was rather unsympathetic.

IMG_0523

And that is the tale of the demise of Screwy Thing.

Thanks for reading, mi amigo.

~ Summer